Service & Maintenance
The testing and compliance work that keeps a property safe and its paperwork straight: safety switches, smoke alarms, test and tag, and thermal imaging on switchboards before a fault becomes a failure.
What this covers
Safety Switches & RCD Testing
Proper trip-time testing with a calibrated instrument, not just pushing the button on the board.
Full detailsSmoke Alarm Installation
Mains-powered, interconnected photoelectric alarms installed and positioned where they will actually work.
Full detailsTest and Tag
Portable appliance testing on a schedule, with a register you can actually produce when someone asks.
Full detailsThermal Imaging Inspections
Thermal scans of switchboards and circuits under load, finding hot connections before they fail or ignite.
Full detailsJobs we have done
5 written up with photos, so you can see the standard rather than take our word for it.
Partial Rewire of a 1950s Kingswood Home
Circuits kept tripping in a 1950s home. Testing found perished rubber and cotton-braided cable still in service, with newer work joined straight onto it.
Read the job
Switchboards That Need Upgrading Around Golden Grove
Rewireable fuses, one safety switch covering a whole house, and hand-written labels. Three real boards and what each one tells you.
Read the job
Underground Cable Fault Finding in Golden Grove
Lighting that kept tripping at a Golden Grove soccer club, traced to a buried join that had let moisture in and corroded the conductors.
Read the job
Pool Power Supply and Subboard in Golden Grove
An underground supply out to the pool equipment, a weatherproof subboard, and a dedicated circuit for the pump, the lights and the heater so one fault can't take out the lot.
Read the jobGot a job like one of these?
Send through a couple of photos and Justin will come back to you with a quote. No callout fee to quote.